Novelties of spring 2024! Wash basins ERICA, LOWA, OCEAN

This spring, Miraggio company released long-awaited models of washbasins into mass production! Now available for order:

Series of ERISA washbasins
LOWA washbasin
OCEAN 700 washbasin

Below we will talk about the uniqueness of each model and technical characteristics.

ERISA series washbasins

ERICA series of washbasins is available in the following sizes:

600х500х157 mm
700х500х157 mm
800х500х157 mm
900х500х157 mm
1000х500х157 mm
1200х500х157 mm L|R (with the location of the bowl on the left or right)

The main feature of this model is a super thin board, the thickness of which is only 7 mm. That means, the washbasin will become almost one whole with the furniture and will look very modern in any interior. Note that even with such a thickness of the side, the washbasin does not lose its technical characteristics and remains resistant to mechanical damage.

By default, ERICA washbasins have a surface mounting type, or, as they say, “on a pedestal”. This means that the model is directly furniture and is intended to be installed on a sideboard edge-to-edge along the outline. If your design involves a long countertop, the sink can be cut into the countertop (the craftsman must cut a hole under the bowl and treat the joint with sanitary sealant and install the sink).

According to the standards, the series of products is manufactured using the MIRAMARBLE technology, that is, of a mixture of ground marble and resin. From the outside, the washbasins are covered with an antibacterial, damage-resistant, white gel (a shade close to 9003 according to the RAL palette).

Also, all models of this series can be ordered in Miramarble MATT and Mirasoft technologies. These technologies are fundamentally different from each other, but they are the same in the features of care.

Mirasoft is a mixture of bauxite (white natural mineral) combined with resin, without additional coating. Sinks made by Mirasoft technology have a snow-white color (cold shade) and a velvety surface.
Miramarble MATT is a mixture of cast marble with resins, externally covered with gel. The difference from Miramarble technology is that at the final stage of production, the product is matted, not polished.

In Mirastone technology, you can order washbasins in sizes 600 - 1000 mm inclusive. Models in size 1200 are not available in this technology. Mirastone is a mixture of pigmented quartz sand combined with resin. Available colors are black shine and gray.

Color coating according to the RAL palette is not available for ERICA series models.

We remind you that, as a manufacturer, you can order products by special order, changing its standard options.

Options are available in this series of ERICA washbasins:

production of a washbasin without a hole for a faucet
trimming the wings of the wash basin with a gel coating
trimming the wings of the wash basin without gel coating

! WARNING! The wash basin has a decorative cover for the drain. Therefore, click-clack cannot be installed in this model.

Complete set of ERICA series wash basins: wash basin, instructions and warranty card, decorative overlay on the drain.

Washbasin OCEAN 700

Ocean series washbasin is currently only available in size

700x400x142 mm.

The main feature of this model is thin walls and a recessed shelf for small things.By default, OCEAN 700 wash basin has a recessed type of installation in the countertop. This means that the model must be cut into the tabletop (the craftsman must cut a hole for the bowl, treat the joint with sanitary sealant and install the sink). Such a washbasin can be installed on the cabinet, but the cabinet must repeat the shape of the sink around the perimeter.

According to the standard, the wash basin is made using the MIRAMARBLE technology, that is, of a mixture of ground marble and resin. From the outside, the wash basin is covered with an antibacterial, damage-resistant, white gel (a shade close to 9003 according to the RAL palette).

OCEAN 700 washbasin can also be ordered in Miramarble MATT and Mirasoft technologies. These technologies are fundamentally different from each other, but they are the same in the features of care.

Mirasoft - a mixture of bauxite (white natural mineral) combined with resin, without additional coating. Sinks made by Mirasoft technology have a snow-white color (cold shade) and a velvety surface.
Miramarble MATT is a mixture of cast marble with resins, with a gel coating on the outside. The only difference from the Miramarble technology is that the product is matted, not polished, at the final stage.

RAL color coating is not available for the OCEAN 700 model. Also, the OCEAN 700 washbasin is not manufactured using Mirastone technology.

We remind you that, as a manufacturer, you can order products by special order, changing its standard options. In this model of the washbasin. OCEAN 700 available options::

manufacturing of a washbasin without a hole for a faucet

Complete set of OCEAN 700 washbasin: washbasin, instructions and warranty card.

LOWA washbasin

LOWA wash basin is available in size only

900x500x350 mm with a bowl depth of 150 mm.

The main feature of this model is the elegant shape and smooth lines of the bowl, which cannot be achieved in materials other than cast stone.

The LOWA washbasin has a floor or wall mounting type. This means that the model can be installed on the wall with the connection of communications directly at the level of the manhole, or order a washbasin without the manhole and remove the communications from the floor and hide them under the washbasin. The last installation option is great for realizing the idea of a mirror wall, and the wash basin will look unsurpassed in design if there is a panoramic window. But in this case, in no case should you save on the quality of communication and revision materials!

According to the standard, the wash basin is made using Mirasoft technology, i.e. of a mixture of bauxite (natural white mineral) in combination with resin, without additional coating. Sinks made by Mirasoft technology have a snow-white color (cold shade) and a velvety surface.

The LOWA washbasin is not available in other manufacturing technologies. We remind you that, as a manufacturer, you can order products by special order, changing its standard options. In this model of the LOWA washbasin, the following options are available:

covering according to the RAL palette on the outside with a matt or glossy finish
manufacturing of a washbasin without an inspection hole

Complete set of LOWA wash basin: wash basin, instructions and warranty card.

All models are already available for order, and until the end of April with a 30% discount! So do not delay and place an order through the shopping cart or consult our managers using the contacts indicated on the website!